분말 및 과립용 플랫 알루미늄 포일 파우치

무인쇄 평면 포일 라미네이트 파우치로, 분말 및 과립의 소분 및 고배리어 보관용입니다.

포일 및 메탈라이즈드 파우치 무료 샘플 · 도면 또는 샘플에 맞춘 맞춤 제작
가격
문의 시 견적 (소재·크기·수량별)
용량Customized to filling specs
백 스타일Open-top 3-side-seal flat pouch, no zip and no handle
소재Aluminium laminate: foil layer + heat-seal inner layer
배리어 성능Blocks light, moisture and oxygen
인쇄Unprinted universal version (print plate can be added later)
충진 호환성Form-fill-seal machines load the pouch automatically
권장 사용법Rep-packaging of powders, instant mixes, granular raw materials
원산지Dongguan, Guangdong
브랜드Kody Packaging
이 제품 문의하기 전화 문의

제품 개요

이 플랫 파우치는 지퍼나 핸들이 없습니다. 패널은 매끄럽고 입구는 상단을 따라 일자형 가장자리이므로 자동 백 픽업, 충전 및 씰링을 위한 폼필씰 설비에 깔끔하게 장입되며, 밀봉에는 크로스 씰 하나만 필요합니다. 경질 부품이 없어 파우치를 납작하게 포장할 수 있고, 카톤 내 부피를 덜 차지하며 운송 시 적재가 용이합니다.

라미네이션 구조는 알루미늄 포일을 기반으로 하며, 알루미늄 포일층이 빛, 수분, 산소를 차단해 빛 차단과 수분 조절이 필요한 분말 및 과립, 예를 들어 분말 블렌드, 인스턴트 음료 믹스, 과립 원료에 적합합니다. 내층은 히트 씰 필름이어서 파우치가 열로 직접 씰링되며, 씰 강도와 기밀성은 씰링 온도, 압력, 유지 시간에 따라 결정되어 충전 라인에 맞게 설정됩니다. 무지 및 미인쇄 상태로 공급되므로 아트워크를 확정하기 전에 기존 파우치 형태로 충전 및 낙하 테스트를 시험해 볼 수 있습니다.

용량과 파우치 치수는 충전 설비에 맞출 수 있으며, 필름 두께와 배리어 등급은 요구되는 보관 수명에 맞게 선택되고, 샘플링과 최소 주문 수량은 최종 사양에 따라 설정됩니다.

업데이트:

핵심 요약
  • 무지 인쇄의 평면형 알루미늄 호일 라미네이트 파우치로, 지퍼나 손잡이가 없으며 분말 및 과립용 직선형 상단 개구부가 있습니다.
  • 자동 봉투 집기, 충전 및 밀봉을 위해 성형-충전-밀봉(Form-Fill-Seal) 장비에서 작동하며, 단 한 번의 횡방향 밀봉으로 마감됩니다.
  • 알루미늄 호일 층이 빛, 습기 및 산소를 차단하여 차광 및 습기 제어가 필요한 분말 혼합물, 인스턴트 음료 믹스 및 과립 원료에 적합합니다.
  • 내층은 열 접착 필름이며, 밀봉 강도와 기밀성은 밀봉 온도, 압력 및 체류 시간에 따라 결정되고 충전 라인에 맞춰 조정 가능합니다.
  • 경성 부품이 없어 파우치를 납작하게 포장하고 잘 적재할 수 있어 상자 부피를 줄여주며, 치수, 필름 두께 및 차단 등급은 충전 장비와 요구되는 유통기한에 맞춰 조정할 수 있습니다.
Display Disclaimer

1. This company is engaged solely in the manufacture and sale of packaging bags, and does not produce or sell any of the finished goods displayed on this page;

2. All graphics, images and related content displayed on this page serve only to demonstrate packaging design, printing effects or product capabilities. They do not indicate that this company manufactures or sells the corresponding finished goods, nor that this company holds any rights in the graphics, trademarks or brands shown;

3. If any displayed image contains trademarks, logos, brand names or other intellectual-property content, all such rights belong to their respective lawful owners. This company has not obtained any authorization, licence or approval from such rights holders, and no affiliation, cooperation, sponsorship or endorsement exists between this company and any rights holder;

4. This company has no intention of infringing any third party's lawful rights and interests, and asserts no intellectual-property rights over the displayed content. The display should not be construed as a trademark use, a brand endorsement or an indication of the commercial source of the goods;

5. Should any rights holder or third party believe that our displayed content infringes its lawful rights and interests or is otherwise improper, please contact us via the phone or email listed on this page. We will promptly remove, replace or adjust the relevant content.

관련 제품

문의

문의하기 · 견적 요청

필요한 사항을 알려주시면 영업 시간에 소재 및 공정 관련 조언과 함께 답변드리겠습니다

담당자
진룽시안, 영업 총괄 매니저
핫라인
+86 15916881866
이메일
mkt@kody.ltd
공장 주소
중국 광둥성 둥관시 중탕진 베이왕로 171호 하이쇼 국제산업단지 2~5층
영업 시간
월~토, 08:30~18:00 (공휴일에도 전화 상담 가능)

문의하기 · 견적 요청

*로 표시된 항목은 필수입니다. 입력하신 정보는 이번 견적에만 사용됩니다.
분말 및 과립용 플랫 알루미늄 포일 파우치